Step 4.
Use the key to lock the security bezel to the closed position.
Figure 183. Locking the security bezel
After you finish
Complete the parts replacement. See
Serial port module replacement
Use this information to remove and install a serial port module.
Remove a serial port module
Use this information to remove a serial port module.
About this task
Attention:
• Read
"Installation Guidelines" on page 51
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Watch the procedure
A video of this procedure is available on YouTube:
CfNsWy-689CRZHExrZEi9I
Procedure
Step 1.
Remove the top cover. See
Step 2.
Disconnect the cable of the serial port module from the system board assembly.
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 52
68.
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
243.
.
Chapter 5
Hardware replacement procedures
246.
to ensure that you
217