Lenovo ThinkSystem SR630 V3 User Manual page 380

4 x 2.5'' NVMe backplane
Use this section to understand the NVMe backplane cable routing for server model with four 2.5-inch front
drives.
To connect cables for a 7mm drive backplane, refer to "7mm drive backplane" on page 270.
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to "Cable routing for
backplane power" on page 274.
To connect signal cables for a backplane for standard 4 x 2.5-inch front drives, refer to the following cable
routing scenarios depending on your server configuration:
• "Cable routing for onboard configuration with two processors" on page 370
Cable routing for onboard configuration with two processors
Figure 311. Cable routing for onboard configuration of 4 x 2.5-inch front NVMe drive bays with two processors
ThinkSystem SR630 V3 User Guide
370