on page
270. If the cable connectors come with protective dust caps, make sure to put them
back on.
Step 2.
Remove the 7mm drive backplane on the top.
Figure 42. 7mm drive backplane removal (top)
a.
Remove the two screws as shown.
b.
Lift the top backplane up and put it aside.
Step 3.
Remove the 7mm drive backplane at the bottom.
Figure 43. 7mm drive backplane removal (bottom)
a.
Remove the screw as shown.
b.
Slide the bottom backplane out from the cage as shown.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
ThinkSystem SR630 V3 User Guide
92