Install The M.2 Cage And M.2 Backplane (16-Edsff Chassis) - Lenovo ThinkSystem SR630 V3 User Manual

Figure 100. M.2 backplane removal
a. Loosen the captive screw on the M.2 backplane.
b. Slide the backplane out and take it out of the cage.
Step 5. Remove the M.2 drives if necessary, see
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube

Install the M.2 cage and M.2 backplane (16-EDSFF chassis)

Use the information in this topic to install the M.2 cage and M.2 backplane to the 16-EDSFF chassis.
About this task
Attention:
• Read "Installation Guidelines" on page 51
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
ThinkSystem SR630 V3 User Guide
164
"Remove the M.2 backplane and M.2 drive" on page
and "Safety inspection checklist" on page 52
68.
157.
to ensure that you