Table of Contents
Advertisement
Chapter 2 Server components and hardware replacement
procedures
This chapter provides detailed information about the components of the server, and specifies the replacement procedures of related
parts.
Note: The following procedures should only be performed by qualified operators or service personnel trained in server maintenance.
Do not perform any removal procedure until you have read and understood all warnings and cautions stated in the "Lenovo Server
User Guide - Read Me First" (hereinafter referred to as "Read Me First"). All removals should be performed strictly as instructed.
Note: All pictures in this chapter are for reference only, and may differ from actual product appearance.
2.1 Server components
2.1.1 Front view
1. 3.5-inch hot-swap drive (4)
2. Rack handle (left)
3. Front controller module
4. Rack handle (right)
2.1.2 Rear view
1. Half-height, half-length PCIe card slot
2. Hot-swap power supply 2
3. Hot-swap power supply 1
4. USB 2.0 connector (2)
Front view of the server (four 3.5-inch HDDs configuration)
Rear views of the server
5. Front VGA connector
6. Drive status LED (yellow)
7. Drive activity LED (green)
5. Serial connector
6. VGA connector
7. Network connection (management)
8. System ID button with LED
18
Advertisement
Table of Contents
