Lenovo ThinkSystem SR630 V3 User Manual page 115

• Read "Installation Guidelines" on page 51
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Watch the procedure
A video of this procedure is available on YouTube:
CfNsWy-689CRZHExrZEi9I
Procedure
Step 1. Remove the top cover. See
Step 2. If the security bezel is installed, remove it. See
Step 3. Remove the integrated diagnostics panel assembly from the chassis.
Figure 56. Integrated diagnostics panel assembly removal
a. Press down the extended tab on the other side of the front chassis.
b. Slide the assembly out of the front chassis.
and "Safety inspection checklist" on page 52
68.
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
243.
"Remove the security bezel" on page
.
Chapter 5 Hardware replacement procedures
to ensure that you
213.
105