Cable routing with an SFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and processor board/
adapter connectors when an 8i SFF HBA/RAID adapter (Gen 3 or Gen 4) is installed.
The following figure illustrates the cable routing for the configuration of 4 x 3.5-inch front SAS/SATA drive
bays with an 8i SFF RAID adapter. Connections between connectors:
Figure 304. Cable routing for 4 x 3.5-inch front SAS/SATA drive bays with an 8i SFF RAID adapter
Table 104. Mapping between backplane connectors and processor board/adapter connectors when an SFF HBA/RAID
adapter is installed
Backplane
Front BP (SAS)
1
Notes:
ThinkSystem SR630 V3 User Guide
354
From
SAS
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
To
C0
↔
.
n
n