Remove The M.2 Cage And M.2 Backplane (16-Edsff Chassis) - Lenovo ThinkSystem SR630 V3 User Manual

Step 5. Install the M.2 drive on the M.2 backplane.
Figure 98. M.2 drive installation
a. Insert the M.2 drive at an angle of approximately 30 degrees into the connector.
b. Rotate the M.2 drive down until the notch
c. Slide the retainer forward (toward the connector) to secure the M.2 drive into place.
Step 6. Connect the cables to the M.2 backplane and processor board. See
267.
After you finish
1. Complete the parts replacement. See
2. Use the Lenovo XClarity Provisioning Manager to configure the RAID. For more information, see:
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html
Demo video
Watch the procedure on YouTube

Remove the M.2 cage and M.2 backplane (16-EDSFF chassis)

Use the information in this topic to remove the M.2 cage and M.2 backplane from the 16-EDSFF chassis.
About this task
Attention:
• Read "Installation Guidelines" on page 51
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
Step 1. Remove the top cover. See
ThinkSystem SR630 V3 User Guide
162
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 52
68.
"Remove the top cover" on page
catches on the lip of the retainer
1
"M.2 drive backplane" on page
243.
.
2
246.
to ensure that you