Table 64. Cable routing for onboard configuration of 4 x 3.5-inch front AnyBay drive bays with 2 x 2.5 rear SAS/SATA
drives
SAS/SATA cable routing
SAS
Front BP
1
SAS
Rear BP
2
Cable routing with an SFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and processor board/
adapter connectors when an 8i SFF HBA/RAID adapter (Gen 3 or Gen 4) is installed.
SATA 0
NVMe
connector
SATA 2
2-3, 0–1
1
NVMe cable routing
From
Front BP
PCIe 1, PCIe 2
.
Chapter 6
Internal cable routing
To
307