Download Print this page
Lenovo ThinkSystem SR630 Quick Start

Lenovo ThinkSystem SR630 Quick Start

Hide thumbs Also See for ThinkSystem SR630:

Advertisement

Quick Links

ThinkSystem SR630
Quick Start
In the box
Server
Rail kit*
Cable management arm*
Material box, including items such as accessory kit, power cords* and
documentation
Note: Items marked with asterisk (*) are available on some models only.
If any item is missing or damaged, contact your place of purchase. Ensure
that you retain your proof of purchase. They might be required to receive
warranty service.
First glance
Front view:
Note: Your server might look different from the following illustrations.
Figure 1. Server models with four 3.5-inch drive bays
Figure 2. Server models with eight 2.5-inch drive bays
Figure 3. Server models with ten 2.5-inch drive bays
VGA connector (available
on some models)
XClarity Controller USB
connector
Power button with power
status LED
System ID button with ID
LED
Rack latch (right)
Drive status LED (yellow)
Rack latch (left)
Rear view:
Figure 4. Server models with three PCIe slots
Figure 5. Server models with two PCIe slots
Figure 6. Server models with two hot-swap drive bays and one PCIe slot
PCIe slot 1 on riser 1
assembly
PCIe slot 3 on riser 2
assembly
Power supply 1
NMI button
VGA connector
Ethernet connectors on the
LOM adapter (available on some
models)
Note: For server models with two hot-swap drive bays in the rear, if the
server is installed in a rack and shipped to you, the server comes with a
shipping bracket installed. Before turning on the server, be sure to remove
the shipping bracket. For server models with two hot-swap drive bays in
the rear, if the server is installed in a rack for shipping, be sure to install
the shipping bracket. For details, refer to the ThinkSystem SR630
Maintenance Manual, which is available at:
http://thinksystem.lenovofiles.com/help/topic/7X01/pdf_files.html
Pull-out information tab
USB 3.0 connector
Network activity LED
System error LED
Hot-swap drive bays
Drive activity LED (green)
PCIe slot 2 on riser 1
assembly
Rear 2.5-inch drive bays
Power supply 2 (available on
some models)
USB 3.0 connectors
XClarity Controller network
connector

Advertisement

loading

Summary of Contents for Lenovo ThinkSystem SR630

  • Page 1 For server models with two hot-swap drive bays in the rear, if the server is installed in a rack for shipping, be sure to install the shipping bracket. For details, refer to the ThinkSystem SR630 Maintenance Manual, which is available at:...
  • Page 2 Note: Operating speed and total memory capacity depend on the the server, see the following Web site: processor model and UEFI settings. http://thinksystem.lenovofiles.com/help/topic/7X01/pdf_files.html For a list of supported memory, see the Lenovo ServerProven Web site: https://static.lenovo.com/us/en/serverproven/index.shtml Storage Supports the following drives: Up to four 3.5-inch hot-swap SAS/SATA drives...