Cable routing for onboard configuration
The following table shows the mapping relationship between backplane connectors and processor board
connectors for onboard configuration.
The following figure illustrates the cable routing for the onboard configuration of 4 x 2.5-inch front AnyBay
drive bays. Connections between connectors:
Figure 308. Cable routing for onboard configuration of 4 x 2.5-inch front AnyBay drive bays
Table 115. Mapping between backplane and processor board for onboard configuration
Backplanes
Front BP (SAS)
↔
↔
,
,
1
1
2
2
From
SAS
↔
↔
, ...
3
3
n
n
To
SATA 0
.
Chapter 6
Internal cable routing
367