Lenovo ThinkSystem SR630 V3 User Manual page 188

Processor carrier
7
Clips to secure carrier to heat sink
8
Torque screwdriver type list
Torx T30 head screwdriver
Procedure
Step 1. Make preparations for this task.
a. Remove the top cover. See
Step 2. If the processor comes with a T-shaped heat sink, fully loosen the two heat sink screws as shown.
Figure 111. Loosening T-shaped heat sink screws
Step 3. Remove the PHM from the processor board.
Figure 112. Removing a PHM
ThinkSystem SR630 V3 User Guide
178
Processor triangular mark
15
Screw Type
Torx T30 screw
"Remove the top cover" on page 243.