Lenovo ThinkSystem SR630 V3 User Manual page 445

Tool
Lenovo XClarity
Integrator (LXCI) for
Microsoft System
Center Configuration
Manager
Notes:
1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.
3. Drive firmware update is only supported by the tools and methods below:
• XCC Bare Metal Update (BMU): In-band, and requires system reboot.
• Lenovo XClarity Essentials OneCLI:
– For drives supported by ThinkSystem V2 and V3 products (legacy drives): In-band, and does not require
system reboot.
– For drives supported only by ThinkSystem V3 products (new drives): Staging to XCC and complete the
update with XCC BMU (In-band, and requires system reboot.).
4. Bare Metal Update (BMU) only.
• Lenovo XClarity Provisioning Manager
From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the
UEFI firmware, and the Lenovo XClarity Provisioning Manager software.
Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when
you start the server and press the key specified in the on-screen instructions. If you have changed that
default to be the text-based system setup, you can bring up the Graphical User Interface from the text-
based system setup interface.
For additional information about using Lenovo XClarity Provisioning Manager to update firmware, see:
"Firmware Update" section in the LXPM documentation compatible with your server at
sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html
• Lenovo XClarity Controller
If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific
server.
Notes:
– To perform an in-band update through Windows or Linux, the operating system driver must be installed
and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.
For additional information about configuring Ethernet over USB, see:
"Configuring Ethernet over USB" section in the XCC documentation version compatible with your
server at
https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html
– If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded
and installed the latest device drivers for the operating system that is running on the server.
For additional information about using Lenovo XClarity Controller to update firmware, see:
Update Core
Methods System
Suppor-
Firmware
ted Updates
In-band
√
On-Target
I/O Drive
Devices Firmware
Updates
Firmware
Updates
All I/O
devices
Graphical Command
user line
interface interface
√
https://
.
Chapter 7 System configuration
Supports
Static
Bundles
(Service
Packs)
√
435