Lenovo ThinkSystem SR630 V3 User Manual page 329

To connect cables for a 7mm drive backplane, refer to
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to
backplane power" on page
To connect cables for M.2 drives, refer to
To connect signal cables for a backplane for standard 4 x 3.5-inch front drives, refer to the following cable
routing scenarios depending on your server configuration:
• "Cable routing for onboard configuration" on page 319
• "Cable routing with an SFF HBA/RAID adapter" on page 321
• "Cable routing with a CFF RAID adapter" on page 325
Cable routing for onboard configuration
The following illustrations and tables show the mapping relationship between backplane connectors and
processor board connectors for onboard configuration.
The following figure illustrates the cable routing for the onboard configuration of 8 x 2.5-inch front SAS/SATA
drive bays. Connections between connectors:
274.
"M.2 drive backplane" on page
↔
1
"7mm drive backplane" on page
267.
↔ ↔ ↔
, , , ...
1 2 2 3 3 n
270.
"Cable routing for
.
n
.
Chapter 6 Internal cable routing
319