1. Install a new drive or a drive cage cover to cover the drive bay.
Figure 77. EDSFF drive filler installation
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install a hot-swap EDSFF drive
Use this information to install an EDSFF drive.
About this task
Attention:
• Read
"Installation Guidelines" on page 51
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
Step 1.
Touch the static-protective package that contains the drive to any unpainted surface on the outside
of the server. Then, take the drive out of the package and place it on a static-protective surface.
Step 2.
Remove the drive filler from the drive bay and keep the drive filler in a safe place.
and
"Safety inspection checklist" on page 52
Chapter 5
to ensure that you
.
Hardware replacement procedures
121