Figure 102. M.2 cage installation
Push the M.2 cage into the chassis until the release latch clicks into place.
Step 5.
Reconnect the cables to the M.2 backplane. See
Step 6.
Install the top cover. See
After you finish
1. Complete the parts replacement. See
2. Use the Lenovo XClarity Provisioning Manager to configure the RAID. For more information, see:
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html
Demo video
Watch the procedure on YouTube
OCP module replacement
Use this information to remove and install the OCP module.
Notes:
• The OCP module is available only on some models.
• If ThinkSystem Redundant System Management Port Adapter is installed on the server, it will not be
displayed on the PCIe card list of system management software, such as XCC, LXPM, and so on.
Remove the OCP module
Use this information to remove the OCP module.
About this task
ThinkSystem SR630 V3 User Guide
166
"Install the top cover" on page
"Complete the parts replacement" on page
"M.2 drive backplane" on page
244.
267.
246.
.