Lenovo ThinkSystem SR630 V3 User Manual page 281

Figure 240. Cable routing for 7mm drives
From
Power port on the 7mm solid-state drive
1
Signal port on the 7mm solid-state drive
2
To
Left: rear hard drive power connector
1
Right: rear hard drive sideband connector
1
PCIe 8 (for NVMe signal, connected when two
2–1
processors are installed)
7mm/M.2 signal port on the processor board (for
2–2
SATA signal)
PCIe 1 (for NVMe signal, connected when one
2–3
processor is installed)
Chapter 6
.
Internal cable routing
271