Event - Nexcom VTC 6222 User Manual

Vehicle telematics & railway computer

Table of Contents

Appendix A: Software Demo Utility for I/O Ports of Function Control

7. Event

The Event tab shows the following alarm messages:

1. Over voltage alarm

2. Lower voltage alarm

3. Over temperature alarm

4. Lower temperature alarm

(Information)

Date: YYMMDD

Time: HHMMSS

GPS Status: 0: Searching 1: Fixed

GPS Latitude

GPS Longitude

G Sensor X value: 0 ~ 65535

G Sensor Y value: 0 ~ 65535

G Sensor Z value: 0 ~ 65535

Activation Time: Define when tracker function starts after ignition signal

becomes low.

Send Period: Define the interval time to send the information to server,

when Tracker Mode is "Continue".

Acceleration Force: Define the value of G-sensor that triggers the event.

Tilt Angle: Define the value of tilt angle that triggers the event.

IMEI: IMEI of WWAN module will be shown.

VTC 6222 and nROK 6222 User Manual

Table of Contents