Event - Nexcom nROK 7251 Series User Manual

Railway computer
Table of Contents

Advertisement

Appendix A: Software Demo Utility for I/O Ports of Function Control

7. Event

The Event menu tab shows the events of nROK 7251.
1. Over voltage alarm
2. Lower voltage alarm
3. Over temperature alarm
4. Lower temperature alarm
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
(Information)
Date: YYMMDD
Time: HHMMSS
GPS Status: 0: Searching 1: Fixed
GPS Latitude
GPS Longitude
G Sensor X value: 0 ~ 65535
G Sensor Y value: 0 ~ 65535
G Sensor Z value: 0 ~ 65535
Activation Time: Define when the tracker function starts after ignition
signal becomes low.
Send Period: Define the interval time to send the information to server,
when Tracker Mode is "Continue".
Acceleration Force: Define the value of G-sensor that triggers the event.
Tilt Angle: Define the value of the tilt angle that triggers the event.
IMEI: IMEI of the WWAN module will be shown.
64
nROK 7251 Series User Manual

Advertisement

Table of Contents
loading

Table of Contents