Chapter 4: System Setup; Removing The Chassis Cover - Nexcom VTC 6222 User Manual

Chapter 4: System Setup

C 4: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the front, rear and sides are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
With the screws removed, pull up the bottom cover to remove it.
Front View
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
41
Bottom View
Rear View
VTC 6222 and nROK 6222 User Manual