Table of Contents
Advertisement
Chapter 4: System Setup
Installing a SSD/HDD Drive
1. Loosen the thumb screws on the SSD/HDD drive bay and slide the drive
bay out.
Thumb
Screws
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
2. Insert the storage drive into the drive bay with the SATA data and power
connector facing towards the end. Align the storage drive's mounting
holes with the mounting holes on the drive bay, and use the provided
screws to secure the storage drive in place.
SATA
Data/Power
Connector
Mounting
Screws
42
VTC 6222 and nROK 6222 User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the VTC 6222 and is the answer not in the manual?
Questions and answers