Nexcom VTC 6222 User Manual page 23

Chapter 1: Product Introduction
▪ 1 x DB15 (DIO)
– 4 x DI with isolation
– 4 x DO with isolation
– Vin, GND for GPIO
▪ 1 x DB15 (Multi Port)
– 1 x RS422/RS485
– 1 x RS232 (TX/RX)
– 1 x CAN 2.0B
Power Management & Software Support
▪ Power input 24/36 VDC w/o isolation
▪ Selectable boot-up & shut-down voltage for low power protection by
software
▪ Setting 8-level power on/off delay time by software
▪ Support S3/S4 suspend mode
▪ 10~255 seconds WDT support, setup by software
▪ SDK (Windows/Linux) including utility and sample code
Operating System
▪ Windows 10/Linux
Dimensions
▪ 260mm (W) x 196mm (D) x 66.5mm (H)
Weight
▪ 3.4kg
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Environment
▪ Operating temperatures: EN 50155, class OT4 (-40~70°C), 85°C for 10
minutes (w/ industrial SSD) with air flow
▪ Storage temperatures: -40°C to 80°C
▪ Relative humidity: 10% to 90% (non-condensing)
▪ Vibration (SSD)
– Operating: MIL-STD-810G, Method 514.6, Category 4, common
carrier US highway truck vibration exposure
– Storage: MIL-STD-810G, Method 514.6, Category 24, minimum
integrity test
▪ Shock (SSD)
– Operating: MIL-STD-810G, Method 516.6, Procedure I, functional
shock=40g
– Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash
hazard shock test=75g
Standards/Certifications
▪ CE
▪ FCC Class A
▪ EN 50155: 2017
– Ambient temperature EN 50155, Class OT4 (-40~70°C), 85°C for 10
minutes
– Interruptions of voltage supply class S1
– Supply change over class C1, C2
– EMC EN 50121-3-2: 2016
– Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
– Shock and vibration IEC 61373 Class B
– Protective coating class PC1 (PC2, by request)
▪ EN 45545-2:2013+A1:2015 (PCB)
8
VTC 6222 and nROK 6222 User Manual