Audio I/O −> Input −> Settings - Digigram IQOYA X/LINK Series User Manual

8.1.2.1.2 Audio I/O −> Input −> settings
This page allows the following:
● Selection of the input signals to be allocated to the encoder inputs
● naming of the encoder inputs
● Configuration of the input AES67, or RAVENNA, or Livewire AoIP streams
This page displays all the inputs proposed by your IQOYA.
The audio sources to be encoded (input Programs) are selected among these inputs
X/LINK-ST & X/LINK-LE
X/LINK-DUAL
X/LINK-AES67
(*) AES67, RAVENNA, Livewire
Analog line input settings
Peak duration window: duration of the display of the peak levels (from 20ms to
10000ms)
Peak: Level value in dBfs above which the vu-meter is red
Headroom: Level value in dBfs above which the vu-meter is orange.
Nominal 1: Level value in dBfs above which the LED right below the headroom
LED is highlighted in green.
Nominal 2: Level value in dBfs above which the 3rd LED from the bottom is
highlighted in green.
Nominal 3: Level value in dBfs above which the 2nd LED from the bottom is
highlighted in green.
Nominal 4 :Level value in dBfs above which the 1rst LED from the bottom is
highlighted in green.
Displayed mono inputs
2 analog, 2 on AES/3, 2 AoIP(*)
4 analog, 4 on AES/3, 4 AoIP(*)
AoIP(*)
IQOYA X/LINK range user manual
.
Number of mono inputs that can be selected for
encoding
2 (basic version
Up to 16 depending on the installed software option.
2
4
56