Lcd Display And Keypad; Sdhc Card Reader; Headphones Output; Navigating Menus On Lcd Display - Digigram IQOYA X/LINK Series User Manual

Fail-over
SD

4.1.2. LCD display and keypad

Next menu or sub-menu
Previous menu or sub-menu
Previous item in the menu, or increase the selected value
Next item in the menu, or decrease the selected value
Validate the selected action

4.1.3. SDHC card reader

Supports SDHC cards, used for:
- saving/loading of the codec configuration
- Storing backup playlists and sound files

4.1.4. Headphones output

Allows audio monitoring.
The push button allows the selection of the audio source to be monitored.
For IQOYA X/LINK-ST and X/LINK-LE: encoder input, decoder output
For X/LINK-DUAL and X/LINK-AES67, it selects the audio that is assigned to vu-meter A or vu-meter B. This assignment is
made from the LCD front panel and keypad.

4.1.5. Navigating menus on LCD display

Use the arrow keys to navigate in the menus, and the Ok key to confirm a choice.
System Eth1
(Home page)
Host Name Enable
Device Name IPv4 @
System Time Speed
Mode
System Date Link Status
NTP Server URL1 Mac @
Green in case at least one output program has switched to a backup audio source
Flashes when SDHC card is accessed
Eth2 Eth3 Eth3
Enable Enable Enable
'yes)
IPv4 @ IPv4 @ IPv4 @
Speed Speed Speed
Mode Mode Mode
Status Status Status
Mac @ Mac @ Mac @
IQOYA X/LINK range user manual
Monitoring Monitoring
A(*) B(*)
Ana IN1 L Ana OUT1 L
Ana IN1 R Ana OUT1 R
AES IN1 L AES OUT1 L
AES IN1 R AES OUT1 R
Ana IN2 L Ana OUT2 L
Ana IN2 R Ana OUT2 R
AES IN2 L AES OUT2 L
AES IN2 R AES OUT2 R
AES67 IN1 L AES67 OUT1 L
AES67 IN1 R AES67 OUT1 R
Status (**)
Clock source: internal,
AES IN1, AES IN2,
PTP, 10 mHz
Valeur (ex: 48000 Hz)
PTP
OFF, Sync, Eth, source
IP@
SNMP: On / Off
FTP: On/Off
NTP date and time
On/Off
14