Table of Contents
Advertisement
IQOYA X/LINK range user manual
Click on the "Maximum bit rate" field, and enter the maximum bit rate allowed for HTTPS traffic.
Default value is 0, which means no limitation on HTTPS traffic.
The smaller the value, the longer it takes to load the WEB page!
Click on "Apply" to confirm the settings.
8.1.1.2.6 Preferences −> Services −> Publish / Discover
This page allows for enabling the
automatic discovery and publishing of AES67 or RAVENNA streams.
In case you do not use AES67 or RAVENNA audio I/Os, there is no need to activate this service.
8.1.1.2.6 Preferences −> Services −> WEB Service
This page allows for selecting the protocol used for the WEB Service API. access.
Default protocol is HTTPS (authentication through the username and password used to access the WEB pages).
HTTP can be selected, in which case no authentication is required; this last mode is less secure than the HTTPS mode, and
is not recommended.
Changing the WEB Service API access protocol restarts the codec.
46
Advertisement
Table of Contents
