Outputs; Connectors; Audio Specifications - Digigram UAX220v2 User Manual

OUTPUTS

Analog line outputs (mono)
Maximum output level /
impedance
Programmable output gain
Other outputs

CONNECTORS

External connectors
AUDIO SPECIFICATION
Sampling frequencies
available
A/D and D/A converter
resolution
Supported audio formats
Operating modes
Monitoring
Monitoring control
∗∗∗
electronically servo-balanced outputs provide automatic level adjustment to accommodate
either balanced or unbalanced lines
∗∗∗∗
converter gain N/A, reference value : 0 dBfs equals 0 dBu
16
UAX220v2
2 servo-balanced
+10 dBu/<100 Ω
by steps of 1 dB, from -60 dBr to +10 dBr
1 stereo headphones out with dedicated output
stage and level adjustment knob
(Maximum output power/minimum load:
2*40 mW / 32 Ω)
UAX220v2
•
Standard USB type A
for connection with computer
•
2 Neutrik™ XLR-3 female
for line inputs
•
2 Neutrik™ XLR-3 male
for line outputs
•
Locking ¼'' Neutrik™ cable jack, female,
for headphones output
UAX220v2
32 / 44.1 / 48 kHz
PCM (8, 16 et 24 bits, full-duplex)
Either selected by application or user-selectable at
a fixed resolution
(modes selected via UAX Manager application)
Zero latency direct monitoring through DSP
Mixed with playback to line and headphone
On/off and mono/stereo
UAX220-Mic
∗∗∗
UAX220-Mic
UAX220-Mic
24 bits
outputs
∗∗∗∗