Connections −> Ip Codecs −> Ip Codec Configuration; Create A New Ip Codec Instance - Digigram IQOYA X/LINK Series User Manual

8.2.2.2.2 Connections −> IP codecs −> IP codec configuration
This page shows the IP codec instances and allows creating new IP codec instances or editing/deleting existing ones. The
IP codec instances created on this page must be activated to be operational and to appear in the codec mosaic of the
"Operations" page.
This page shows the following parameters for each IP codec instance:
● Audio I/O: The audio I/Os associated with the IP codec instance.
● RTP port: The port used by the the IP codec instance to listen to the IP audio stream coming from the remote party.
● Contact name: The display names of the SIP accounts used to register the IP codec instance with SIP servers
(only SIP is activated for this instance). There can be up to 2 registrations per IP codec instance.
● SIP address: The SIP addresses of the IP codec instance, one per registration.
● Status: The status of the IP codec instance is empty when the IP codec instance is disabled else the possible
statuses are:
○ "Registered": SIP is activated and the IP codec instance is successfully registered with the SIP server.
○ An error message in red: SIP is activated and the IP codec instance fails to register with the SIP server. The
possible error messages are:
- "Invalid address, check
- "Unknown name or
authentication password is wrong.
- "No remote
○ "Not registered": The user has manually unregistered the IP codec instance.
○ "Ready": SIP is not activated and the IP codec instance is ready for a symmetric RTP connection.
○ "Failed": SIP is not activated and the IP codec instance is not ready for a symmetric RTP connection
probably because the audio listening port is not available.

8.2.2.2.2.1 Create a new IP codec instance

To create a new IP codec instance, click on
on its left. Then provide the requested parameters and click on the
DNS": the SIP domain is wrong,
user": the SIP account name, the SIP authentication name or the SIP
response": The SIP server is unreachable.
IQOYA X/LINK range user manual
button, or create it from an existing one by clicking the icon
button. To create several instances
107