Preferences −> Services −> Ssh; Preferences −> Services −> Snmp; Preferences −> Services −> Https - Digigram IQOYA X/LINK Series User Manual

Note that backup playlists and sound files have to be stored in the folder
8.1.1.2.3 Preferences −> Services −> SSH
This page allows enabling/disabling the SSH service on IQOYA.
SSH is mainly to be used by Digigram technical support for advanced diagnostics.
8.1.1.2.4 Preferences −> Services −> SNMP
This page allows setting the SNMP parameters.
It also displays the System group MIB-II information.
IQOYA can be controlled and monitored via SNMP (SET, GET, Traps) provided that the SNMP service is activated.
IQOYA can send the SNMP traps to up to 5 SNMP supervisors (Trap addresses 1 to 5).
Click on "Apply" to confirm the settings.
8.1.1.2.5 Preferences −> Services −> HTTPS
This page allows setting a bandwidth limitation to the HTTP traffic.
In case the IP audio stream takes almost all the available network bandwidth, the HTTP traffic generated when accessing
the WEB pages may disturb the IP audio frames transmission, because the total bandwidth necessary for the IP audio
stream plus HTTP traffic may exceed the available network bandwidth.
To avoid this problem, IQOYA offers the possibility to set a bandwidth limitation for the HTTPS traffic.
IQOYA X/LINK range user manual
connection to IQOYA X/LINK.
Username is: ftp. Password is the
administrator password, by default:
iqoya.
DEVICE_STORAGE.
45