Connections −> Network −> Vlan - Digigram IQOYA X/LINK Series User Manual

8.2.2.1.2 Connections −> Network −> VLAN
This page allows declaring VLANs on the ethernet interfaces. No VLAN is declared by default.
Multiple VLANs can be declared for each ethernet interface.
Click on the "+Add VLAN" button to declare a new VLAN.
Parameter
Network interface
VLAN ID
Name
Status
Priority
is On
Read/Write if DHCP
is Off
Type Description
Read/Write Select the network interface that will support the VLAN (ETH1 to
ETH4)
Read/Write Enter the VLAN ID in the ranges 1-4094. Avoid using ids 1002 to 1005
which are reserved.
Read/Write Enter a logical name for this VLAN
Read/Write Allows enabling/disabling this VLAN.
Select "Running" to enable this VLAN.
Select "Stopped" to disable this VLAN.
Read/Write Enter the VLAN priority in the range 0-7.
IQOYA X/LINK range user manual
Enter the IP address of the secondary DNS (if any).
DHCP On
Displays the IP address of the secondary DNS automatically set by
DHCP (may be empty).
103