Digigram IQOYA X/LINK Series User Manual page 118

click on the "Close" button at any time.
The parameters requested at creation are described below
SIP account parameter
Name
Description
Use a specific jitter buffer size
Jitter buffer size (ms)
:
Type Description
Read/Write Name of the call profile
Read/Write Call profile description
Read/Write This parameter defines the jitter buffer size to be used when the user
selects the profile at call time:
- Checked: the specific jitter buffer size specified below will be used,
- Unchecked: the default jitter buffer size defined at IP codec instance
level will be used.
Read/Write Visible only if "Use a specific jitter buffer size" is checked.
IQOYA X/LINK range user manual
118