Table of Contents
Advertisement
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31
32-bit word 1:
Version number (4 bits) = 0000
32-bit word 2:
32-bit word 3
The validation mask validates the GPI statuses to be taken into account.
The page
Preferences −> Auxiliary data −> GPIO
GPO.
Status: Select enable to activate the status tunneling.
To declare virtual GPI's to be tunneled, select "In" from parameter "Mode".
To declare virtual GPO's, select "Out" from the parameter "Mode".
To declare both virtual GPI's and GPO's, select "In & Out".
The following screen capture corresponds to the mode "In & Out".
IQOYA X/LINK range user manual
32 bits. Bit 0 = Status GPI0 −> Bit 31 = Status GPI31
Validation mask (32 bits)
allows enabling/disabling the in-band tunneling of GPI status information to
User ID (24 bits)
52
Advertisement
Table of Contents
