Digigram IQOYA X/LINK Series User Manual page 55

Displayed VU-meters unit is dBfs.
For a X/LINK with more than 8 mono channels (X/LINK-AES67 with additional optional I/O channels), the group of channels
to be displayed is selectable from the top right menu.
Select "Unlock faders" to change the input gains.
If the X/LINK features analog inputs, it is possible to adjust both the analog input gain and the digital input gain.
Selection of analog or digital gain is done thanks to the selector below the fader.
Vu-meters settings
Click on the "Settings" button to adjust the bargraph display and the front panel LED vu-meters display (red zone, orange
zone, and green zones).
IQOYA X/LINK range user manual
When Digital is selected, a digital gain/attenuation is applied to the input
signal.
When Analog is selected an analog gain/attenuation is applied to the input
signal. The value displayed below the fader corresponds to the input signal
level which gives 0 dBfs after analog to digital conversion
55