Advanced Settings −> Services−> Ssh; Advanced Settings −> Services−> Https - Digigram IQOYA X/LINK Series User Manual

Note that backup playlists and sound files have to be stored in folder
8.2.3.2.3 Advanced settings −> services−> SSH
This page allows enabling/disabling the SSH service on IQOYA.
SSH is mainly to be used by Digigram technical support for advanced diagnostics.
8.2.3.2.4 Advanced settings −> services−> HTTPS
This page allows setting a bandwidth limitation to the HTTP traffic.
In case the IP audio stream takes almost all the available network bandwidth, the HTTP traffic generated when accessing
the WEB pages may disturb the IP audio frames transmission, because the total bandwidth necessary for the IP audio
stream plus HTTP traffic may exceed the available network bandwidth.
To avoid this problem, IQOYA offers the possibility to set a bandwidth limitation for the HTTPS traffic.
Click on the "Maximum bit rate" field, and enter the maximum bit rate allowed for HTTPS traffic.
Default value is 0, which means no limitation on HTTPS traffic.
The smaller the value, the longer it takes to load the WEB page!
IQOYA X/LINK range user manual
Click on the "Service activation" field.
Select "Yes" to enable the FTP
service, "No" to disable it.
If necessary, you may change the
port used for FTP (default value is
21).
Parameter "Bandwidth limitation"
allows limiting the network
bandwidth of the FTP traffic.
Click on "Apply" to confirm the
changes.
Note that a username and password
are required to establish an FTP
connection to IQOYA X/LINK.
Username is: ftp. Password is the
administrator password, by default:
iqoya.
DEVICE_STORAGE.
135