Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Digigram UAX220v2
Summary of Contents for Digigram UAX220v2
- Page 1 UAX220v2 UAX220-Mic Professional USB Audio Interface User manual...
- Page 2 Digigram S.A. Parc de Pré Milliet, 38330 Montbonnot - FRANCE Tel: +33 (0)4 76 52 55 01• Fax: +33 (0) 4 76 52 53 07• E-mail: info@digigram.com Digigram Inc. 2000 North 14th Street - Suite 530, Arlington, VA 22201-USA Tel: +1 703 875 9100 •...
-
Page 3: Table Of Contents
While every effort has been made to ensure accuracy, Digigram is not responsible for errors and omissions, and reserves the right to make improvements or changes in the products and programs described without notice. -
Page 4: Information For The User
INFORMATION FOR THE USER This device complies with part of FCC rules. Operation is subject to the following two conditions: ( ) This device may not cause harmful interference, and ( ) This device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Contents Of This Package
UAX220v2 & UAX220-Mic User manual CONTENTS OF THIS PACKAGE Thank you for purchasing a Digigram UAX220v2 or UAX220-Mic USB audio device. The UAX220v2/UAX220-Mic package consists of the following components: * a UAX220v2 or UAX220-Mic * the user’s manual at hand. -
Page 6: Uax220-Mic: Additional Hardware Features
Mac OS X • Linux HARDWARE INSTALLATION Connect the UAX220v2/UAX220-Mic to the USB port (USB 1.1 or 2.0) of your computer. It will then automatically be detected by the operating system and its driver will also be automatically installed. Note: If you have several USB peripherals connected to your computer, they may consume more energy than the USB port can provide. -
Page 7: How To Check The Installation
UAX220v2 & UAX220-Mic User manual HOW TO CHECK THE INSTALLATION Once the UAX220v2/UAX220-Mic is connected to the USB port of your computer, you can check the accessibility of its inputs/outputs as described hereafter. Under Windows Go to <Start>, <Settings>, <Control panel>, <Sounds and Audio Devices>, tab ‘Hardware’. -
Page 8: Under Mac Os X
Under Mac OS X Go to <System Preferences>, <Sound>. The UAX will be displayed as follows. Under Linux The parameters of the UAX220v2/UAX-Mic are accessible from the audio application of your choice. -
Page 9: Controls
• This switch permits to attenuate the analog input signal level by -12 dB for UAX220v2, -20 dB for UAX220-Mic. The attenuation is active when the corresponding LED is lit. • This switch allows adding up the left and right input channels. The summation is active when the corresponding LED is lit. -
Page 10: Software Controls
Software controls Control Panel under Windows To control the levels of your UAX220v2 or UAX220-Mic, use the Volume Control application. To open this application, double-click onto the loudspeaker icon in the Windows task bar. In case this icon is not displayed in the task bar, go to <Start>, <Settings>, <Control panel>, <Sounds and... - Page 11 User manual ‘Loudspeaker’ volume control The fader ‘Loudspeaker’ modifies the analog output gain of the UAX220v2/UAX220-Mic. The applied gain varies from -60 dBr to +10 dBr, by steps of 1 dB. These controls are applied to both line and headphones outputs.
-
Page 12: Mac Os Volume Control Panel
Mac OS volume Control Panel The fader ‘Output volume’ modifies the output level of the D/A converters of UAX220v2/UAX220-Mic. The ‘Mute’ checkbox next to the volume control allows to mute/unmute the UAX220v2/UAX220-Mic outputs. -
Page 13: Configuration
UAX220v2 & UAX220-Mic User manual CONFIGURATION UAX Manager The UAX Manager application (available on the Digigram web site) allows UAX220v2/UAX220-Mic to • either work at a fixed frequency (32 kHz, 44,1 kHz or 48 kHz), or at the frequency defined by the application •... -
Page 14: Control Panel Under Mac
UAX Manager under Mac... -
Page 15: Specifications
UAX220v2 & UAX220-Mic User manual SPECIFICATIONS CONFIGURATION UAX220v2 UAX220-Mic Bus/Format USB 1.1, compatible 2.0 144 mm X 87 mm X 34 mm Size Integrated USB cable: 1.5 m Integrated audio cable: 0.75 m Power consumption 500 mA max. Operating: temp / humidity 0°C / +50°C •... -
Page 16: Outputs
OUTPUTS UAX220v2 UAX220-Mic ∗∗∗ Analog line outputs (mono) 2 servo-balanced Maximum output level / +10 dBu/<100 Ω impedance ∗∗∗∗ Programmable output gain by steps of 1 dB, from -60 dBr to +10 dBr 1 stereo headphones out with dedicated output... -
Page 17: Analog Audio Performance
Windows XP, Windows 2003 Server, Supported operating systems Mac OS X, Linux Depending on the host operating system’s Management implementation of the USB Audio specification: DirectSound, Core Audio, ALSA Digigram np SDK through Virtual PCX Additional management Third-party Asio driver... -
Page 18: Appendices
APPENDICES Schematic diagram UAX220v2 & UAX220-Mic Headphones Mic/Line +48 V (Stereo) In 1 Monitoring Gain MONO -12 dB Mixed Mic/Line -20 dB +48 V In 2 Line Out (Stereo) UAX220-Mic only XLR-3 connector pinout XLR-3P XLR-3P Pin # Signal Ground Positive signal (‘hot pin’)