Table of Contents
Advertisement
Program Parameter
Program name
Disabled
Audio outputs section
Primary output: output type
Primary output: first output
Primary output: Number of
outputs
Primary output: Analog / AES
duplication
Type
Description
Read/Write
Name given to this output Program.
Read/Write
Set this parameter to "Yes" if you want to disable the program. This means that IQOYA
does not process it.
Set this parameter to "No" so that IQOYA processes this program and decodes audio.
Read/Write
Audio I/O: to select a physical output (not available on X/LINK-AES67)
AoIP: to select a declared output stream (AES67/RAVENNA/Livewire)
Audio Bus: to select an audio bus, typically used for transcoding (optional)
Read/Write
Select the first audio output associated with this program.
Note that it is necessary to select an audio output that is not assigned to another active
program (otherwise an error is displayed). In case two programs are assigned to the same
output, only one can be started.
Read/Write
Set this parameter to 1 for mono, 2 for stereo, 6 for 5.1, 8 for 7.1 (these last two cases are
possible on X/LINK-AES67 with multiple channels).
Read/Write
No: the program is decoded to the selected audio outputs.
Yes: the program is decoded to both the analog and the AES3 outputs. This feature
requires that an audio bus is selected from the parameter "Secondary output -> First audio
bus".
IQOYA X/LINK range user manual
84
Advertisement
Table of Contents
