Table of Contents
Advertisement
File path or mount point
Buffer
In case the audio format of the IP stream is not signalled in-band, it is necessary to declare if the received IP service
includes an FEC.
Select the appropriate FEC for the Type field as shown below. The payload type is set automatically.
In case FEC is not sent on the default UDP port and IP address, select "Yes" in the " Advanced mode" field, to be able to
enter the IP address and UDP port.
FEC stream parameters
Type
Payload type
Advanced mode
IP address
Listening port
Click on "Save" to confirm the settings.
Read/Write
Only displayed when Transport Protocol is set to Icecast/Shoutcast
File path of the source of a Shoutcast server.
File path of the source or mount point of an Icecast server.
Read/Write
Only displayed when Transport Protocol is set to Icecast/Shoutcast
Buffer value in seconds necessary to decode correctly the HTTP stream. This value may depend
on the HTTP server. In case the decoding is producing audio breaks, this value has to be
increased.
Type
Description
Read/Write
Select the FEC that is configured on the encoder of the received IP stream.
Read/Write
Enter the same FEC payload type that is configured on the encoder of the received IP
stream.
Read/Write
Select "Yes" if the FEC destination IP address is not the same as the IP stream destination
IP address, or of it is to be received on a UDP port different from "IP stream UDP port +2"
Read/Write
Displayed if Advanced mode is set to "Yes".
In unicast, set the IP address to 127.0.0.1.
In multicast, enter the multicast IP address.
Read/Write
Displayed if Advanced mode is set to "Yes".
Enter the UDP port for receiving the FEC.
IQOYA X/LINK range user manual
82
Advertisement
Table of Contents
