Send" Category Of Menus; Send −> Programs - Digigram IQOYA X/LINK Series User Manual

IQOYA X/LINK range user manual

8.1.3 "Send" category of menus

This category allows defining the programs and the IP services to be streamed, but also getting the status of the IP services.
.
The principle consists in first declaring the programs, and then declaring the IP services that carry the programs
8.1.3.1 Send −> Programs
This page allows viewing and declaring the audio encoding instances: the programs.
It can be accessed either from the left column, or from the icon "Go to programs" on the top right of the IP Services page
.
In case some programs are already created, they are listed in the Programs page, with their characteristics: name, mode,
first audio input, sample rate, audio format, bitrate, IP Service using this Program.
If a Program is used in at least one IP Service, the icon is displayed on the left of its name, and "Used" appears in the
column "IP Service". The IP services that use this program are listed when moving the mouse above "Used".
If a Program is not used by any IP Service, the selection button is displayed on the left of its name.
A Program can be associated with one IP Service. Only unused Programs can be selected in an IP Service.
64