Table of Contents
Advertisement
FEC stream MPEG
This section allows configuring a Pro MPEG COP#3.2 FEC for the MPEG-TS stream.
Type
Number of columns (L)
Number of rows (D)
Click on the icon
on the bottom right of the page to add IP destinations.
Click on "Save" to confirm the settings. Click on "Save & New" to confirm the settings and create a new IP service with the
same parameters.
Click on "Close" to discard the settings.
8.1.4 "Receive" category of menus
This category allows defining the IP services to be received by IQOYA, and the audio programs to be played to the outputs
of IQOYA; three decoding priorities can be defined per audio program.
8.1.4.1 Receive −> IP services
This page allows declaring and viewing the IP services to be received by IQOYA.
Read/Write
No Redundancy: No FEC is generated.
Column: 1 dimension FEC scheme. Only FEC frames generated from columns are
streamed. Number of columns can be set from 1 to 20. This FEC is ideal for correcting
packet burst errors and random errors. The column FEC frames are sent to UDP port =
MPEG-TS stream UDP port + 2.
Column and row: 2 dimensions FEC scheme. Provides correction for non-consecutive lost
frames, and can correct any single packet loss within a row of media packets.
●
●
●
The column FEC frames are sent to UDP port = MPEG-TS stream UDP port + 2.
The row FEC frames are sent to UDP port = MPEG-TS stream UDP port + 4.
Read/Write
Column depth
Column scheme: value from 1 to 20
Column and row scheme: 4 <= L <= 20
Read/Write
Row depth: 4 <= Number of rows (D) <= 20
IQOYA X/LINK range user manual
4 <= Number of Columns (L) <= 20.
4 <= Number of rows (D) <= 20
L x D <= 100
79
Advertisement
Table of Contents
