Preferences −> Network −> Ip Routing; Preferences −> Network −> Http Stream Proxy; Preferences −> Auxiliary Data; Preferences −> Auxiliary Data −> Serial Port - Digigram IQOYA X/LINK Series User Manual

8.1.1.3.3 Preferences −> Network −> IP routing
This page allows viewing the current IP routing table, downloading it, and uploading a modified IP routing table.
In case the routing table has to be modified, click on "Download".
The routing table can be edited with a standard text editor (such as notepad). You may add IP routes, as described in the
downloaded file. Only the additional routes must appear in this file. Routes to directly accessible subnets are not
present in this file and need not be added to this file.
Note: In case you use more than one ethernet interface, do not declare several gateways. Declare instead one default
gateway, for instance on Eth0, and declare routes on other ethernet interfaces through this routing table.
8.1.1.3.4 Preferences −> Network −> HTTP stream proxy
This page allows declaring a proxy used for HTTP streaming.
Parameter
IP address
Port
Exceptions
8.1.1.4 Preferences −> Auxiliary data
This section allows configuring the tunnelling of serial data and status data.
8.1.1.4.1 Preferences −> Auxiliary data −> Serial port
This page allows enabling/disabling the RS232 port, and setting its configuration.
Type
Read/Write
Read/Write
Read/Write
IQOYA X/LINK range user manual
Description
IP address (or domain name) of the HTTP proxy.
TCP Port for the HTTP proxy (80 by default)
Default is None.
Select "Locals" to bypass the HTTP stream proxy for local IP addresses.
50