Table of Contents
Advertisement
2. KEY HARDWARE FEATURES
2.1. IQOYA X/LINK-LE
●
1U rack
●
Two internal redundant power supply units (2x220 VAC, optionally 220VDC / -48VDC)
●
4 Ethernet ports via RJ-45 connectors. 1 x 100 Mbits/s, and 3 x 100/1000 Mbits/s ports
●
2 balanced analog line inputs and outputs
●
1 AES/3 input and output
●
Switchable hardware by-pass on inputs to outputs in case of power supply failure
●
1 RS232 port for auxiliary data tunneling
●
8 GPIO's
●
External synchronization: AES3 input, PTP clock, Livewire clock
●
Status LEDs
●
SDHC card reader
●
6.35mm headphones jack with volume knob and codec input/output selection
2.2. IQOYA X/LINK-ST
●
1U rack
●
Two internal redundant power supply units (2x220 VAC, optionally 220VDC / -48VDC)
●
4 Ethernet ports via RJ-45 connectors. 1 x 100 Mbits/s, and 3 x 100/1000 Mbits/s ports
●
2 balanced analog line inputs and outputs
●
1 AES/3 input and output
●
Switchable hardware by-pass on inputs to outputs in case of power supply failure
●
1 RS232 port for auxiliary data tunneling
●
8 GPIO's
●
External synchronization: AES/3 input, PTP clock,
●
Front panel LCD display and keypad
●
Status LEDs
●
SDHC card reader
●
6.35mm headphones jack with volume knob and codec input/output selection
2.3. IQOYA X/LINK-DUAL
●
1U rack
●
Two internal redundant power supply units (2x220 VAC, optionally 220VDC / -48VDC)
●
4 Ethernet ports via RJ-45 connectors. 1 x 100 Mbits/s, and 3 x 100/1000 Mbits/s ports
●
4 balanced analog line inputs and outputs
●
2 AES/3 input and output
●
Switchable hardware by-pass on the first stereo inputs to outputs in case of power supply failure
●
1 RS232 port for auxiliary data tunneling
●
4 GPIO's if the 10 MHz / 1 PPS external synchro input(s) are used (optional)
●
External synchronization: AES/3 input, PTP clock, Livewire clock
●
Front panel LCD display and keypad
●
Status LEDs
●
SDHC card reader
IQOYA X/LINK range user manual
10
Advertisement
Table of Contents
