Table of Contents
Advertisement
Parameter
Program
Name
Audio stream
IP address or Domain name
Network interface / VLAN
Port
Local source port
DSCP
Payload size
Click on the icon
to steam the program to an additional IP destination.
Click on "Save" to confirm the settings. Click on "Save & New" to confirm the settings and create a new IP service with the
same parameters.
Click on "Close" to discard the settings
Encapsulation = None and Transport protocol = HTTP
Type
Description
Read/Write
Select the Program to be streamed from the list of Programs. A Program can be used by several
IP services.
Read/Write
Destination IP address (unicast or multicast) or domain name.
Read/Write
Displayed if a multicast destination IP address has been entered.
Select the network interface or VLAN that is to be used for streaming.
Read/Write
Enter the destination UDP port.
Read/Write
Local UDP port number of IQOYA SERV/LINK.
In case a lot of streams are generated, it is recommended that they are not all streamed through
the same local port.
Read/Write
Select the quality of service (QoS) class of the stream.
Read/Write
Size (in ms) of the audio transported by an RTP frame.
For unframed formats (like PCM, G7xx, apt-X), payload size value is rounded to the nearest
multiple value that is equal or higher than the processing granularity value.
For framed formats (like MPEG, AAC), payload size value is rounded to the nearest multiple
value equal or higher than the frame size.
IQOYA X/LINK range user manual
72
Advertisement
Table of Contents
