Table of Contents
Advertisement
Source Type = IP service, and IP service is RTP
Priority Source Parameter
Type
Service
Received format auto-detection
Disabled
Digital Level (dB)
Input channel mapping
PLL
Type
Description
Read/Write
Select the audio source for this priority.
IP Service: audio will be extracted from a declared IP service.
File: audio source is a local file
Playlist: audio source is a local "m3u" playlist
Audio input: audio source is an audio input.
Read/Write
Select the IP service from the list of declared IP services.
(IP services must have been declared first from the IP Services page).
Read
This parameter is set automatically according to the selected IP service.
If the IP service has been declared with in-band format signalling, auto-detection is set to "Yes".
Read/Write
Set this parameter to "Yes" to disable this decoding priority. Disabling a defined priority is useful
when some servicing is in progress on it (network servicing, servicing on the source of the IP
stream). The priority can then be enabled when servicing operations are finished.
Read/Write
Digital gain applied to the audio samples on this priority.
Read/Write
Displayed when the audio source includes more audio channels than the output. Select how the
channels of the selected source are to be processed:
●
No: each input channel is assigned to an output channel.
●
Mix: the input channels are mixed to a single output channel. An attenuation of -6 dB is
applied to each channel before they are mixed. The gain/attenuation set through
"Digital level" comes in addition to this attenuation.
●
First channel only: only the first channel is processed.
●
Second channel only: only the second channel is processed.
Read/Write
To be set to "Yes" in most of the use cases. It allows synchronisation of the incoming stream to
the internal clock, thus guaranteeing a constant latency with the encoder.
IQOYA X/LINK range user manual
86
Advertisement
Table of Contents
