Digigram IQOYA X/LINK Series User Manual page 75

Server mount point Read/Write
Login Read/Write
Password Read/Write
Protocol Read/Write
Network port Read/Write
Session directories Read/Write
Max index Read/Write
Service Read/Write
Region Read/Write
Audio stream: Advanced settings
Buffer Read/Write
Segment count Read/Write
Segment duration Read/Write
File auto delete Read/Write
Segment persistence
HTTP connection splitting Read/Write
HTTP authentication Read/Write
method
Click on "Save" to confirm the settings. Click on "Save & New" to confirm the settings and create a new IP service with the
same parameters.
Click on "Close" to discard the settings
Mount point on the origin server the HLS stream has to be pushed to.
For authentication to the origin server.
For authentication to the origin server.
Transport protocol used to push HLS data to the origin server. Select HTTP or HTTPS.
Network port used to push HLS data to the origin server.
For AWS. Selectable values are None, date time, Index.
- Date time: each time the IP service is started, a subdirectory under the server mountpath will be created
with the current date and time.
- Index: Date time: each time the IP service is started, a subdirectory"SessionX" under the server mountpath
is created. "X" is the index of the directory and is defined with the session index parameter.
-None: no subdirectory under the server mountpath is created.
When using "Index" or "None" values, previous files can be overwritten each time the IP service is started;
For AWS. Only displayed if "Session directories" is set to "Index".
This is the number of subdirectories allowed.
For AWS. Name of your amazon media storage service used on the origin server.
For AWS. Name of the region used on the origin server.
Internal buffer used for the connection to the origin server (from 2 to 60 seconds).
Number of segments contained in the HLS playlist (from 3 to 20)
Duration of a segment (from 1 to 30 seconds).
Allows keeping or removing the segment stored on the origin server. The number of segments to keep is
given by parameter "Segment persistence".
Number of segments to store on the origin server. The entered value must be as follows:
4 <= Value, and Value > ("Segment count" + 1)
Some CDNs may unexpectedly break the connection after some chunks have been pushed to them. The
connection is then lost. This parameter allows to avoid these breaks, forcing the connection to stop and
immediately restart before an unexpected break. The value reflects the number of chunks that are pushed
to the server during an HTTP connection. Default value is 32.
This parameter is only displayed when "CDN Preset" is set to "None". It defines the method used to
negotiate credentials - such as username or password
Values:
- None: No authentication is required.
- Auto: basic method
- AWS Signature v4
- Akamai edge grid v1
- Digest
IQOYA X/LINK range user manual
75