Preferences −> Network; Preferences −> Network −> Eth1 (-> Eth4) - Digigram IQOYA X/LINK Series User Manual

8.1.1.3 Preferences −> Network
8.1.1.3.1 Preferences −> Network −> Eth1 (-> Eth4)
These pages allow configuring the four network ports of IQOYA X/LINK.
Click on a parameter field ("Status" for instance) to enter the editing mode.
Parameter
Name
Ethernet interface name
Status
Speed and duplex mode obtained
Speed and duplex mode asked
This menu allows accessing the network configuration of IQOYA.
Type Description
R/W Allows giving a name to the interface. This is the name displayed in the WEB pages
typically for selecting the ethernet interface.
Read Displays the "real low level" name of the ethernet ports, as they can be read from th
IQOYA back panel. This parameter can't be changed.
Read/Write This parameter allows enabling/disabling the interface
Default value=Running
Possible values:
Running: ethernet port is enabled.
Stopped: ethernet port is disabled
Read Displays the current speed and mode of the ethernet interface.
Read/Write Allows selecting the working mode of the ethernet interface. Possible values are as
IQOYA X/LINK range user manual
47