Preferences −> System −> Audio Setup - Digigram IQOYA X/LINK Series User Manual

The clock offset distribution section displays information about the received Livewire clock.
Click on "Apply" to confirm your choice
8.1.1.1.3 Preferences −> System −> Audio setup
This page allows setting the processing granularity and the working sampling frequency value IQOYA X/LINK
Click on a parameter field to be able to change the values.
Parameter
Processing granularity
Sampling frequency
Click on "Apply" to confirm your changes.
.
Description
This is the smallest amount of data processed at a time by IQOYA. The lower the processing granularity, the lower the
latency. Possible values are 1ms, 2ms, 3 ms, 4 ms.
However, a value of 1ms may lead to audio underruns, depending on the features enabled on IQOYA. In case this
happens, it is necessary to increase the processing granularity value.
Note: the payload size of an IP frame is adjustable via parameter Payload size, from the Send page (see paragraph
Encoder parameters configuration).
It defines the working sampling frequency of IQOYA. Note that received and generated IP streams can carry audio at a
different sampling frequency (in which case a high quality frequency change is applied).
When sampling frequency is set to 48 kHz, IP streams can be at 48 kHz, 32 kHz, 16 kHz (G722), and 8 kHz (G711). Note
that 44.1 kHz is allowed for a HTTP stream.
When sampling frequency is set to 44.1 kHz, IP streams must be at 44.1 kHz.
IQOYA X/LINK range user manual
36