Table of Contents
Advertisement
Listening network interface
Listening port
Auto registration
Registration every
(secondes)
Outbound proxy activation
Outbound proxy domain
Outbound proxy port
Allows symmetric RTP
connections without SIP
Presence
Presence activation
Notification lease (seconds)
Net topology-related settings
Connection to public
internet
Public IP address
STUN server address
Read/Write
The network interface to be used by the IP codec instance to listen to the
SIP signaling. Use "Any" if you do not have instructions from your IT
team on this.
Read/Write
Port to be used by the IP codec instance to listen to the SIP signaling.
The web interface proposes you a free port. Keep the proposed value to
avoid port conflicts.
Read/Write
'Yes' enables automatic and periodic SIP registration(s) of the IP codec
instance with the SIP server(s). The refresh period of the SIP registration
is defined below.
'No' disables the automatic and periodic SIP registration(s) of the IP
codec instance with the SIP server(s).
Note that manual registration is possible in the call window.
Read/Write
This is the refresh period of the SIP registration in seconds. It is not
recommended to enter a value below 30s. The default value is 120.
Read/Write
Enable/disable the use of an outbound SIP proxy.
Read/Write
Visible only if "Outbound proxy activation" is yes.
This is the IP address or the domain name of the outbound SIP proxy.
Read/Write
Visible only if "Outbound proxy activation" is yes.
This is the listening port of the outbound SIP proxy.
Read/Write
Enables/disables the possibility of also establishing or accepting
symmetric RTP connections.
Read/Write
Enable/disable the SIP presence service. Do not disable the SIP
presence service if you use Digigram's SIP infrastructure IQOYA
CONNECT.
Read/Write
This is the refresh period of the subscription to the presence service. The
lease value must be greater than the field 'Registration every (seconds)'.
The default value is 3600.
Read/Write
Select the proposition that best matches with your internet connection
topology. Ask you IT team if you don't know.
If you are using IQOYA CONNECT, Digigram's SIP infrastructure, choose
"Direct" because IQOYA CONNECT integrates a NAT traversal solution.
Read/Write
Visible only if "Connection to public internet" is "From behind NAT
specifying public address".
Enter the public IP address or domain name of the device.
Read/Write
Visible only if "Connection to public internet" is "From behind NAT using
STUN".
This is the IP address or domain name of a STUN server.
IQOYA X/LINK range user manual
111
Advertisement
Table of Contents
