Livewire (Slave) - Digigram IQOYA X/LINK Series User Manual

Slave clock sensitivity
The clock offset distribution section displays information about the received PTP clock.

8.2.3.1.2.2 Livewire (Slave)

The following parameters appear when the mode "Livewire Slave" is selected:
Description of the parameters:
Parameter
R/W It defines the sensibility of the slave clock to the PTP packet jitter. Enter a
value between 500 (for a high sensitivity) and 100 (for a low sensitivity).
Default value is 500
Read/ Meaning
Write
IQOYA X/LINK range user manual
126