Table of Contents
Advertisement
Click on the "Action" field, and click on the arrow to display the list of possible actions.
Select the appropriate action through the list.
For a firmware update, select "Upload a package", and click on "Browse" to select the file to be uploaded.
Click on "Apply" to start the upload. Audio activity is not stopped during the upload.
Once the package upload is completed, select the action "Install last uploaded firmware",and click on "Apply". Applying the
firmware stops the audio activity. The equipment restarts automatically.
The following operations are also possible from the "Action" drop-down menu:
●
Check previous firmware package: this allows checking that the previous firmware version that is stored locally is
correct.
●
Check last uploaded package: this allows checking that the last uploaded firmware version is correct. This
operation is done automatically during the upload phase.
●
Install previous firmware package (rollback): this allows installing a previous version of the firmware that is stored
locally. This is a firmware downgrade.
●
Remove last uploaded package: this allows deleting the last uploaded package. This means that this package will
not be installed.
●
Remove previous uploaded package: this allows deleting the previous uploaded package. This means that an
upload is necessary for a firmware downgrade.
Copy firmware to SD card on install
Set to Yes, this parameter allows copying to the SD card the firmware to be installed to facilitate a future possible firmware
rollback. Exemple:
1) Firmware to upload and apply = version A
Copy to SD card set to Yes
2) Firmware to upload and apply=: version B
Copy to SD card set to Yes
IQOYA X/LINK range user manual
41
Advertisement
Table of Contents
