Table of Contents
Advertisement
Network interface
IGMPv3 filtering mode
IGMPv3 IP source addresses
IP address x
The clock offset distribution section displays information about the received Livewire clock.
Click on "Apply" to confirm your choice.
8.2.3.1.3 Advanced settings −> System −> Audio setup
This page allows setting the processing granularity and the working sampling frequency:
R/W
Select the network interface that receives the livewire clock.
R/W
Off: X/LINK subscribes to the Livewire clock which can be generated by any source
IP address.
Include: X/LINK subscribes to the Livewire clock which is generated only by the
listed source IP addresses.
Exclude: X/LINK subscribes to the Livewire clock which is generated by any
source IP address, with exception of the listed IP addresses..
R/W
Displayed if IGMPv3 filtering mode is set to "Exclude" or "Include". Allows
declaring the source IP addresses to be included or excluded. Click on
to add an IP@ to the list.
IQOYA X/LINK range user manual
127
Advertisement
Table of Contents
