Digigram IQOYA X/LINK Series User Manual page 57

AES/3 input settings
AoIP input settings
IQOYA X/LINK range user manual
Click on the "Input" field to rename the input. The new name will appear in
other WEB pages (Input Program). Audio levels are adjustable from the
VU-Meters page.
Click on the "Input" field to rename the input. The new name will appear in
other WEB pages (Input Program). Audio levels are adjustable from the
VU-Meters page.
The AES/3 input features a hardware sample rate converter, which is
useful when the AES/3 input is not synchronous of the selettect sampling
clock source.
To enable the hardware SRC, select AES+SRC.
To disable the hardware SRC, select AES.
For AES transparent transport, select AES+TUN
Click on the "Input" field to rename the input. The new name will appear in other
WEB pages (Input Program). Audio levels are adjustable from the VU-Meters page.
Click on"Edit" to be able to configure the input AoIP stream, as described below.
Click on "Metrics" to display the metrics on the configured AoIP stream. This is
useful to get the minimum jitter value to be entered in the parameters.
LED: if an AoIP stream is configured and it is well received the LED is green; The
LED is red if the stream is not received, and grey if the stream reception is
disabled.
Input Name: the same as described above.
Input Status: Enable/disable.
Input AoIP type: AES67, RAVENNA, or Livewire
Number of channels: defines the number of audio channels to be extracted from
this AoIP stream
When the AES67 or RAVENNA type is selected, the Browse button allows
discovering the available AES67 or RAVENNA streams on all the networks. The list
of parameters below is then filled in according to the selected AoIP stream.
57